Please select paper thickness. Measure the material thickness = Please make a selection 0.063-0.065mm GSM 50g 0.22-0.23mm GSM 180g 0.26-0.27mm GSM 200g 0.29-0.30mm GSM 230g 0.34-0.35mm GSM 270g 0.39-0.40mm GSM 300g 0.44-0.46mm GSM 350g 0.50-0.52mm GSM 400g 0.57-0.59mm GSM 450g 0.63-0.65mm GSM 500g 0.70-0.72mm GSM 550g 0.76-0.78mm GSM 600g
| Paper thickness | Creasing rule (mm)【A】 | G-Tape | Thickness【B】 | Creasing width【C】 |
|---|---|---|---|---|
| 0.063-0.065mm GSM 50g | 2pt (0.7) x 23.5 | A-0308 | 0.3 | 0.8 |
* Thickness of G-Tape = height of cutting knife – height of creasing rule * Crease width = thickness of paper x 2 + thickness of creasing rule
** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
- A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
G-Tape (creasing matrix)
| Paper thickness | Creasing rule (mm)【A】 | G-Tape | Thickness【B】 | Creasing width【C】 |
|---|---|---|---|---|
| 0.22-0.23mm GSM 180g | 2pt (0.7) x 23.4 | A-0410 | 0.4 | 1.0 |
* Thickness of G-Tape = height of cutting knife – height of creasing rule * Crease width = thickness of paper x 2 + thickness of creasing rule
** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
- A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
G-Tape (creasing matrix)
| Paper thickness | Creasing rule (mm)【A】 | G-Tape | Thickness【B】 | Creasing width【C】 |
|---|---|---|---|---|
| 0.26-0.27mm GSM 200g | 2pt (0.7) x 23.4 | A-0412 | 0.4 | 1.2 |
* Thickness of G-Tape = height of cutting knife – height of creasing rule * Crease width = thickness of paper x 2 + thickness of creasing rule
** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
- A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
G-Tape (creasing matrix)
| Paper thickness | Creasing rule (mm)【A】 | G-Tape | Thickness【B】 | Creasing width【C】 |
|---|---|---|---|---|
| 0.29-0.30mm GSM 230g | 2pt (0.7) x 23.4 | A-0413 | 0.4 | 1.3 |
* Thickness of G-Tape = height of cutting knife – height of creasing rule * Crease width = thickness of paper x 2 + thickness of creasing rule
** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
- A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
G-Tape (creasing matrix)
| Paper thickness | Creasing rule (mm)【A】 | G-Tape | Thickness【B】 | Creasing width【C】 |
|---|---|---|---|---|
| 0.34-0.35mm GSM 270g | 2pt (0.7) x 23.4 | A-0414 | 0.4 | 1.4 |
* Thickness of G-Tape = height of cutting knife – height of creasing rule * Crease width = thickness of paper x 2 + thickness of creasing rule
** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
- A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
G-Tape (creasing matrix)
| Paper thickness | Creasing rule (mm)【A】 | G-Tape | Thickness【B】 | Creasing width【C】 |
|---|---|---|---|---|
| 0.39-0.40mm GSM 300g | 2pt (0.7) x 23.3 | A-0515 | 0.5 | 1.5 |
* Thickness of G-Tape = height of cutting knife – height of creasing rule * Crease width = thickness of paper x 2 + thickness of creasing rule
** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
- A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
G-Tape (creasing matrix)
| Paper thickness | Creasing rule (mm)【A】 | G-Tape | Thickness【B】 | Creasing width【C】 |
|---|---|---|---|---|
| 0.44-0.46mm GSM 350g | 2pt (0.7) x 23.3 | A-0516 | 0.5 | 1.6 |
| 3pt (1.0) x 23.3 | A-0519 | 0.5 | 1.9 |
* Thickness of G-Tape = height of cutting knife – height of creasing rule * Crease width = thickness of paper x 2 + thickness of creasing rule
** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
- A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
G-Tape (creasing matrix)
| Paper thickness | Creasing rule (mm)【A】 | G-Tape | Thickness【B】 | Creasing width【C】 |
|---|---|---|---|---|
| 0.50-0.52mm GSM 400g | 2pt (0.7) x 23.2 | A-0517 | 0.5 | 1.7 |
| 3pt (1.0) x 23.2 | A-0520 | 0.5 | 2.0 |
* Thickness of G-Tape = height of cutting knife – height of creasing rule * Crease width = thickness of paper x 2 + thickness of creasing rule
** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
- A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
G-Tape (creasing matrix)
| Paper thickness | Creasing rule (mm)【A】 | G-Tape | Thickness【B】 | Creasing width【C】 |
|---|---|---|---|---|
| 0.57-0.59mm GSM 450g | 2pt (0.7) x 23.2 | A-0519 | 0.5 | 1.9 |
| 3pt (1.0) x 23.2 | A-0522 | 0.5 | 2.2 |
* Thickness of G-Tape = height of cutting knife – height of creasing rule * Crease width = thickness of paper x 2 + thickness of creasing rule
** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
- A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
G-Tape (creasing matrix)
| Paper thickness | Creasing rule (mm)【A】 | G-Tape | Thickness【B】 | Creasing width【C】 |
|---|---|---|---|---|
| 0.63-0.65mm GSM 500g | 2pt (0.7) x 23.2 | A-0520 | 0.5 | 2.0 |
| 3pt (1.0) x 23.2 | A-0522 | 0.5 | 2.2 |
* Thickness of G-Tape = height of cutting knife – height of creasing rule * Crease width = thickness of paper x 2 + thickness of creasing rule
** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
- A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
G-Tape (creasing matrix)
| Paper thickness | Creasing rule (mm)【A】 | G-Tape | Thickness【B】 | Creasing width【C】 |
|---|---|---|---|---|
| 0.70-0.72mm GSM 550g | 3pt (1.0) x 23.1 | A-0624 | 0.6 | 2.4 |
| 4pt (1.4) x 23.1 | B-0627 | 0.6 | 2.7 |
* Thickness of G-Tape = height of cutting knife – height of creasing rule * Crease width = thickness of paper x 2 + thickness of creasing rule
** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
- A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
- B type (4pt 1.4mm creasing rule, width 15mm)
G-Tape (creasing matrix)
| Paper thickness | Creasing rule (mm)【A】 | G-Tape | Thickness【B】 | Creasing width【C】 |
|---|---|---|---|---|
| 0.76-0.78mm GSM 600g | 3pt (1.0) x 23.0 | A-0825 | 0.8 | 2.5 |
| 4pt (1.4) x 23.0 | B-0830 | 0.8 | 3.0 |
* Thickness of G-Tape = height of cutting knife – height of creasing rule * Crease width = thickness of paper x 2 + thickness of creasing rule
** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.
- A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)
- B type (4pt 1.4mm creasing rule, width 15mm)